e-trainiaDocs
Course ConfigurationHow to Add Curriculum

Quizzes & Assessments

Key Features
Quiz✓Assessment✓Question Bank✓Multiple Question Types✓Timer & Randomisation✓

Follow the steps below to add and configure Quizzes and Assessments in an e-trainia course.

1. Locate the Course

Open Manage Courses

From the sidebar, click Manage Courses to view the course list.

Find the Course Card

Find the course card for an eLearning or Sequential Blended course.

Note

Quizzes and Assessments can be added only to eLearning or Sequential Blended courses.

Open the Options Menu

Click the three-dot (⋮) options icon on the course card.

Click Edit

Click Edit in the options menu. The course configuration page opens with the Course Information tab active.


2. Navigate to Course Curriculum

StepAction
1On the course configuration page, switch to the Course Curriculum tab.
2The curriculum tree loads for the course.
3A Language dropdown appears in the top-left corner of the curriculum view.
4Select the language you want to set up first from the dropdown.

Language Handling

Note

  • Single-language course: No further language switching is required. Fill in the content and proceed.
  • Multi-language course: You must complete the content for every enabled language. Switch the dropdown and repeat the setup in each language.

Warning

If any enabled language has missing content, publishing is blocked until every language is fully populated.


3. Add a Chapter

Before adding a quiz or assessment, the chapter must exist.

Click Add Chapter

In the Course Curriculum view, click Add Chapter.

Enter Chapter Details

Provide the chapter title and any required chapter-level settings.

Save

Click Save to add the chapter to the curriculum tree.

➔ How to Add Chapters


4. Add Content (Quiz or Assessment)

Click Add Content

Inside the target chapter, click + Add Content.

Provide Content Title

Enter the Content Title — this is how the quiz or assessment appears in the lesson list.

Select Content Type

Choose Quiz or Assessment from the Content Type options.

Quiz

Assessment

Set Default Language

Choose Yes or No for Use Default Language.

SelectionBehaviour
YesThe content does not require translation and displays in the default language for all languages.
NoThe content must be translated manually for each enabled language.

Configure Attempts

For Assessments, enter the No. of Attempts allowed for the learner/trainee.

Warning

Quizzes do not have an Attempts field. The attempt limit applies only to Assessments. Quizzes can be retried without limit.

Submit the Content

Click Submit to add the Quiz or Assessment item to the chapter. It now appears as a row in the curriculum tree.

➔ Adding Learning Content


5. Open the Question & Answer Builder

Once the Quiz or Assessment item is saved:

Hover Over the Content Item

Move the mouse pointer over the Quiz or Assessment row in the curriculum tree.

Click the Eye Icon

An Eye icon appears on hover. Click it to open the Question & Answer setup screen for that item.

Build Questions

Inside the Question & Answer setup, add questions, configure answer options, enable math expressions, or import from the Question Bank.


Key Difference: Quiz vs Assessment

AspectQuizAssessment
AttemptsUnlimited — learner/trainee can retry without limitLimited by pass criteria
Pass Requirement for CertificationNot required — attempt is enoughRequired — learner/trainee must pass
Effect on Course ProgressDoes not block progressionGates the next content and certification
OutcomeKnowledge check, no certification impactPass/fail decides certification validity
If Not PassedLearner/trainee simply moves onLearner/trainee moves to the next content, but certification is not validated
If PassedNo change to certificationUnlocks next condition and validates certification

Note

Course Type → Assessment Pass Required = Yes The learner/trainee must pass the assessment. Passing unlocks the next condition and validates certification.

Course Type → Assessment Pass Required = No

The learner/trainee can move to the next content without passing, but the certification remains unvalidated until the assessment is cleared.

In simple terms: A Quiz checks learning and can be retried endlessly without blocking anything. An Assessment controls progression and certification — passing it is mandatory when the course requires it.


Assessment Pass Required (Course Type Setting)

This toggle lives at the course-setup level and controls what happens when a learner/trainee fails an assessment.

SettingBehaviour
Assessment Pass Required = YesLearner/trainee must pass the assessment. Passing unlocks the next condition and validates certification.
Assessment Pass Required = NoLearner/trainee can move to the next content without passing. Certification remains unvalidated until the assessment is cleared.

Warning

When Assessment Pass Required = Yes, learners/trainees who do not pass cannot progress to the next content. Plan your content sequencing and pass thresholds accordingly.

Tip

Even when Assessment Pass Required = No, the assessment still gates certification. If certification matters for the course outcome, keep the pass requirement set to Yes.



6. Quiz and Assessment Settings

These settings apply to the entire quiz.

6.1 Basic Fields

FieldTypeRequiredDescription
Quiz TitleText✅Name shown to learners/trainees
DescriptionText❌Short summary of the quiz
CategoryDropdown❌Group/tag for organisation
Total MarksAuto-calculated✅Sum of all question marks
Passing MarksNumber✅Minimum score to pass

6.2 Timer

FieldTypeDescription
Enable TimerToggleTurn the quiz timer on/off
DurationNumber (minutes)Total time allowed
Auto-submit on timeoutToggleIf ON, quiz submits automatically when time expires

Behaviour:

  • Timer starts when the learner/trainee begins the quiz.
  • A countdown is displayed at the top of the quiz screen.
  • If Auto-submit on timeout is ON → the quiz is submitted automatically at 00:00.
  • If Auto-submit on timeout is OFF → the learner/trainee is warned but can finish the current question.

6.3 Marks

FieldTypeDescription
Marks per QuestionNumberDefault marks assigned to each question

Rules:

  • Total Marks = Σ (marks of each question).

6.4 Randomisation

SettingOptionsDescription
Question OrderSame Order / Random OrderControls sequence of questions
Same Order—Questions appear in the order created
Random Order—Questions shuffled for each learner/trainee
Duplicate Questions❌ Not supportedA quiz cannot contain duplicate copies of the same question

Warning

Duplicate questions are not supported in a single quiz. If a question already exists in the quiz, adding it again is blocked.


7. Question Types — Detailed Guide

7.1 Multiple Choice (Single Answer)

Fields:

FieldTypeRequired
Question TextRich Text✅
OptionsMin 2✅
Correct AnswerRadio select✅
MarksNumber✅
ExplanationText❌

Actions available:

  • ➕ Add Option
  • 🗑️ Delete Option
  • 🔀 Shuffle Options (randomise the A/B/C/D order for each learner/trainee)
  • ✅ Mark one option as correct Multi Choice:


7.2 Multiple Choice (Multiple Answers)

Fields:

FieldTypeRequired
Question TextRich Text✅
OptionsMin 2✅
Correct AnswersCheckbox (multiple)✅
MarksNumber✅

Actions available:

  • ➕ Add Option
  • 🗑️ Delete Option
  • 🔀 Shuffle Options
  • ✅ Mark one or more options as correct Multiple Choices with Answers:


7.3 True / False

Fields:

FieldTypeRequired
StatementRich Text✅
Correct AnswerTrue / False✅
MarksNumber✅

Behaviour:

  • Two fixed options: True and False.
  • Options cannot be shuffled or deleted.
  • Can be converted to MCQ via Change Question Type. True or False:


7.4 Written / Descriptive

Fields:

FieldTypeRequired
Question TextRich Text✅
Answer TypeShort Text / Long Text✅
Word LimitNumber❌
MarksNumber✅

Behaviour:

  • Requires manual grading unless a keyword-matching rubric is applied.
  • Supports math expressions in the model answer. Written:


7.5 Image MCQ

Fields:

FieldTypeRequired
Question TextRich Text✅
Image OptionsMin 2✅
Correct Image(s)Select✅
MarksNumber✅

File Requirements:

ConstraintValue
Max File Size< 5 MB per image
Supported FormatsJPG, JPEG, PNG

Actions available:

  • ⬆️ Upload Image
  • 🔄 Replace Image
  • 🗑️ Delete Image
  • 🔀 Shuffle Image Options
  • ✅ Mark correct image(s) Image MCQ:

Info

Files larger than 5 MB or in unsupported formats (GIF, BMP, SVG, WEBP) are rejected with an error message.


8. Common Question Actions

All question types support the following toolbar actions:

ActionIconDescription
Add Question➕Insert a new question
Delete Question🗑️Remove the question from the quiz
Change Question Type🔄Convert between types
Shuffle Options🔀Randomise option order for each learner/trainee
Delete Option❌Remove an option (MCQ/Image MCQ only)
Add Option➕Add an option
Move Up / Down⬆️⬇️Reorder questions
Import📥Import from Question Bank

8.1 Changing Question Type

You can convert a question to a different type from the question editor menu.

From → ToPreserves
MCQ (Single) → MCQ (Multiple)Options, marks, question text
MCQ → True/FalseQuestion text, marks (options dropped)
True/False → MCQQuestion text, marks (options reset)
MCQ → Image MCQQuestion text, marks (text options dropped)
Any → WrittenQuestion text, marks (options dropped)

Warning

Changing the type may discard existing options. A confirmation popup appears before the change.


9. Math Expression Support

9.1 Enabling Math Expressions

ToggleLocationDescription
Enable Math ExpressionQuiz Settings / Question EditorAllows LaTeX input in questions and answers
Math Expression CalloutQuestion EditorVisual helper that renders LaTeX inline

9.2 LaTeX Syntax

Enable Math Expression:

LaTeX Example

m = \frac{y_2 - y_1}{x_2 - x_1}

9.3 Supported LaTeX Commands

CategoryExamples
Fractions\frac{a}{b}
Powersx^2, x^{n+1}
Roots\sqrt{x}, \sqrt[3]{x}
Greek letters\alpha, \beta, \pi
Summation\sum_{i=1}^{n}
Integrals\int_a^b
Matrices\begin{matrix} ... \end{matrix}

Tip

Math expressions work in question text, options, answers, and explanations.


10. Validation Rules

RuleMessage
Question text empty"Question text is required."
No correct answer"Please mark a correct answer."
Fewer than 2 options"At least 2 options are required."
Duplicate question"This question already exists in the quiz."
Image > 5 MB"Image size must be less than 5 MB."
Unsupported image format"Only JPG, JPEG, and PNG are supported."
Invalid LaTeX"Math expression syntax error."
Timer = 0 and enabled"Timer duration must be greater than 0."
No questions in quiz"Add at least one question before publishing."

FAQ

Q1. Can I shuffle only the options and keep question order fixed?

Yes. Enable Shuffle Options at the question level and keep Question Order = Same Order.

Q2. Can two identical questions exist in one quiz?

No. Duplicate questions are not supported. You must edit the existing one or create a variant.

Q3. What happens if the timer runs out?

If Auto-submit is ON, the quiz submits automatically. Otherwise the learner/trainee can finish the current question.

Q4. Can I change an MCQ into an Image MCQ later?

Yes. Use Change Question Type — text options are dropped and you upload images.

Last updated on